Explore our precision-engineered implant systems manufactured with medical-grade Titanium and Stainless Steel 316LVM, supplied directly to Swiss medical distributors and hospital networks.
A comprehensive anatomical and mechanical assessment of angular stable fixation in complex pertrochanteric, intertrochanteric, and proximal diaphyseal femoral fractures.
Fixation of fractures in the proximal third of the femur presents one of the most demanding technical challenges in trauma surgery. The proximal femur experiences extreme mechanical loads, with bending forces exceeding 300% of body weight during normal gait cycles. Traditional non-locking dynamic hip screws (DHS) or non-contoured plates frequently yield high rates of fixation failure, including varus collapse, screw cut-out, and secondary revision requirements in osteoporotic patients.
The Proximal Femoral Locking Compression Plate (PFLCP) System engineered by Sharma Orthopedic incorporates an anatomically pre-contoured profile designed to match the complex helical geometry of the lateral proximal femur. By aligning precisely with the greater trochanter and shaft axis, intraoperative bending is minimized, protecting the titanium/stainless steel matrix from micro-cracking and material fatigue.
Key design elements include multi-planar locking screw configurations within the plate head. Three neck-targeting screws are angled superiorly into the femoral head and neck at precise trajectories (120°, 130°, and 135° angle variations), creating a rigid 3D spatial scaffold. This angular stability converts shear stresses into axial compression, eliminating relying on bone-plate friction for stability—a paramount advantage in osteopenic bone structures.
Subtrochanteric fractures are notorious for intense muscular deforming forces: the iliopsoas flexes and externally rotates the proximal fragment, while the gluteus medius abducts it. The distal fragment is pulled medially by the adductor group. This creates severe bending moments along the lateral cortex.
Our Proximal Femoral Locking Plates feature a thick, tapered lateral wall design that resists dynamic pull-out vectors. Integrated combi-holes allow surgeons the flexibility to perform initial dynamic fracture compression using cortical screws prior to inserting locking screws for fixed-angle rigid stability.
From Alpine high-velocity sports trauma to complex geriatric fragility management, our locking plate systems serve specialized needs across cantonal health institutions.
Switzerland's aging demographic requires implants engineered for compromised bone mineral density. In university hospitals across Zurich, Bern, and Basel, our Proximal Femoral Locking Plates are utilized to treat osteoporotic pertrochanteric fractures, where traditional lag screws risk cutout. The multi-screw angular stability distributes load across a broad surface area, allowing early patient mobilization post-surgery.
Trauma units in Valais, Grisons, and Lucerne frequently handle severe comminuted subtrochanteric fractures resulting from high-impact skiing accidents. These high-energy injuries demand implants with high fatigue resistance and structural rigidity. Our titanium plates withstand extreme mechanical shear vectors, enabling reliable fracture bridging during extended bone healing cycles.
With high rates of primary total hip arthroplasty (THA) in Switzerland, periprosthetic fractures around stem implants present a growing clinical challenge. Our proximal femoral locking plates feature staggered hole patterns and unicortical/bicortical locking options, allowing surgeons to securely stabilize fractures around existing femoral stems without compromising stem stability.
Navigating Swissmedic regulatory criteria, Swissdamed alignment, and EU MDR transition protocols for seamless B2B medical supply chain operations.
Following updates to the Swiss Ordinance on Medical Devices (MedDO 812.213), medical implant suppliers exporting to Switzerland must meet rigid quality assurance and traceability guidelines. Sharma Orthopedic operates under a fully integrated ISO 13485:2016 Certified Quality Management System, guaranteeing that every proximal femoral plate batch comes with complete raw material certifications, mill test reports (MTRs), and full dimensional inspection documentation.
We work in direct coordination with Swiss Authorized Representatives (CH-REP) to fulfill all Swissmedic registration requirements. Each implant is laser-etched with unique Device Identification (UDI) barcodes, supporting full traceability through Swissdamed databases and hospital inventory management protocols.
Swiss medical procurement networks demand high delivery precision, flexible order quantities, and sterilized/non-sterilized packaging configurations. Sharma Orthopedic maintains a streamlined direct export supply line to Swiss cantonal hubs including Geneva, Zurich, Lausanne, and St. Gallen.
Comparing Sharma Orthopedic Proximal Femoral Locking Plates material grade choices for optimal biomechanical performance.
| Performance Specification | Titanium Alloy (Ti-6Al-4V ELI) | Stainless Steel (316LVM) | Clinical Significance for Swiss Surgeons |
|---|---|---|---|
| Standard Compliance | ISO 5832-3 / ASTM F136 | ISO 5832-1 / ASTM F138 | Guarantees bio-inert performance and ultra-low tissue reaction rates. |
| Tensile Strength (MPa) | ≥ 860 MPa | ≥ 690 MPa | Prevents permanent plastic deformation under extreme dynamic patient loads. |
| Elastic Modulus (GPa) | 110 GPa | 200 GPa | Titanium closer matches human cortical bone (15-30 GPa), reducing stress shielding. |
| MRI Compatibility | Non-magnetic / Minimal Artifacts | Paramagnetic / Moderate Artifacts | Enables post-operative soft-tissue MRI diagnostic imaging without interference. |
| Plate Thickness Profile | 4.5mm – 5.8mm Tapered | 4.5mm – 5.8mm Tapered | Low-profile anatomical edge polishing reduces lateral soft-tissue irritation. |
| Screw Locking Mechanism | Threaded Conical Locking Holes | Threaded Conical Locking Holes | Prevents screw backout under torsional dynamic shear loads. |
Combining over three decades of engineering expertise with state-of-the-art manufacturing infrastructure in Waghodia, Gujarat.
Our integrated manufacturing complex features multi-axis 5-axis CNC machining centers, high-precision Swiss sliding-head lathes, and automated robotic surface cleaning lines. This infrastructure guarantees sub-micron precision for every locking plate thread and contour.
With a dedicated 10-member Quality Control department and 8 Regulatory/Quality Assurance experts, all product batches undergo CMM dimensional verification, spectrographic alloy verification, and fatigue cycle testing per ASTM standards.
Offering over 10,000 distinct orthopedic SKUs—ranging from Total Knee & Hip Arthroplasty systems to Spine, Intramedullary Nails, Small/Large Fragment Locked Systems, and Arthroscopy implants under one single supply umbrella.
Founded in 1992, Sharma Orthopedic India Limited has established a robust international distribution footprint spanning over 50 countries across Europe, Latin America, Asia, and Africa. We offer Swiss medical distributors competitive factory-direct pricing, customized surgical kit configurations, and rapid air-freight dispatch directly to Zurich (ZRH) or Geneva (GVA) airports.
Key information for hospital purchasing departments, trauma surgeons, and medical device importers in Switzerland.
All Sharma Orthopedic products are manufactured under ISO 13485:2016 quality standards and carry valid CE mark certifications aligned with European and Swiss regulatory frameworks. We supply full technical dossiers, material certificates, and work alongside designated CH-REP entities to ensure seamless compliance with Swissmedic and MedDO guidelines for market placement in Switzerland.
Our Proximal Femoral Locking Plates are available in Left and Right anatomical variations. Shaft lengths range from 2-hole up to 16-hole options (overall length 120mm to 340mm) in both Titanium (Ti-6Al-4V ELI) and Stainless Steel (316LVM). head configurations support 4.5mm/5.0mm locking and cortex screws.
Standard export orders are dispatched within 7 to 14 business days via express air-freight carriers (DHL/FedEx/Lufthansa Cargo) arriving at Zurich or Geneva hubs. For bulk hospital tender contracts, we maintain dedicated buffer stock to guarantee 72-hour emergency dispatch capabilities.
Yes. We supply dedicated, ergonomic instrument sets housed in heavy-duty anodized aluminum graphic sterilization trays. Instrument sets can be customized with specific drill bit diameters, torque-limiting screwdrivers, and targeted bending irons based on cantonal hospital surgical protocols.
Yes, we provide non-sterile sample demonstration kits and sawbone evaluation sets for hospital procurement committees and chief orthopaedic surgeons wishing to assess metallurgical finish, thread tolerances, and instrument handling prior to placing formal supply contracts.
Elevate your hospital network or distribution portfolio in Switzerland with certified, precision-engineered Proximal Femoral Locking Plates and surgical systems.